• 68 values read
  • 38 boxed on the drawing
  • 26 waiting for a person
  • Read October 12, 2026
The drawing: A 1963 Apollo wired tray: an eleven-row list of materials, wiring details, and notes the microfilm damaged.
What to show on the drawing
Read and checkedWaiting for a person to checkHow sure the engine isA table, with the rows readA part read as a wholeOutlined where the engine found them: Title block, General notes, Bill of Materials (11 rows), Application (next assembly / used on) (1 row).The zone gridThe border's zones, F to A and 6 to 1, as the engine read them. Select a value to see its zone.

A 1963 Apollo wired tray: an eleven-row list of materials, wiring details, and notes the microfilm damaged. Real engine output.

MIT Instrumentation Laboratory for NASA; a U.S. National Archives aperture card, via the Internet Archive. Drawn August 1963. Source: archive.org. License: Public Domain Mark 1.0. Shown here in grayscale, with the reading drawn over it. Nobody named on it endorses SpecCapture.

Checked by hand against the drawing, this reading got 18 values wrong, 10 of them accepted without a check: what it got wrong.

Title block

Identification

Part NumberAccepted on its own, 92% confidence
Drawing NumberAccepted on its own, 92% confidence
TitleAccepted on its own, 95% confidence

Approvals

RoleNameDate
CheckedNothing read
ApprovedNothing read

Sheet

Sheet SizeAccepted on its own, 75% confidence
ScaleAccepted on its own, 92% confidence
UnitsAccepted on its own, 88% confidence
Drawing StandardAccepted on its own, 89% confidence

Assist

Sizes and counts worked out from the drawing. Check these before you rely on them.

Envelope LengthWaiting for a person to check, 86% confidence
Envelope WidthWaiting for a person to check, 72% confidence
Envelope HeightWaiting for a person to check, 75% confidence
Envelope FormWaiting for a person to check, 82% confidence
Envelope UnitsWaiting for a person to check, 96% confidence
GD&T Callout CountWaiting for a person to check, 20% confidence
Hole CountWaiting for a person to check, 51% confidence
Thread Callout CountWaiting for a person to check, 20% confidence

Bill of Materials

ItemQuantityPart NumberDescription

Application (next assembly / used on)

Next Assembly

General notes

What this reading got wrong

  • Sheet Size: read “A”, where the drawing prints “E”. Accepted without a check.
  • Checked By: read “Champs Liny contact”, where the drawing has a handwritten signature and date. Waiting for a person.
  • Approved By: read “0”, where the drawing has a handwritten signature and date. Waiting for a person.
  • Description · Item 6: read “DAIVE CYLINDER, EJECTION SCREW”, where the drawing prints “DRIVE CYLINDER, EJECTION SCREW”. Waiting for a person.
  • Description · Item 5: read “PIN.STEP”, where the drawing prints “PIN, STEP”. Accepted without a check.
  • Part Number · Item 4: read “QQ-W-345 TYPES”, where the drawing prints “QQ-W-343 TYPE 3”. Accepted without a check.
  • Description · Item 4: read “WIRE, 22 GAUGE, COATED, 50FT”, where the drawing prints “WIRE, 22 GAUGE, COATED, SOFT”. Waiting for a person.
  • Quantity · Item 1: read “!”, where the drawing prints “1”. Accepted without a check.
  • Description · Item 1: read “TRAY A, SUBASSEMBLY.LEFT HAND”, where the drawing prints “TRAY A, SUBASSEMBLY, LEFT HAND”. Waiting for a person.
  • Next Assembly 1003137: read “1003137”, where the drawing prints “1003187”. Accepted without a check.
  • Note 1: read “I.INTERPRET DRAWING IN ACCORDANCE WITH STANDARDS PRESCRIBED BY MIL -D-70327”, where the drawing prints “1.INTERPRET DRAWING IN ACCORDANCE WITH STANDARDS PRESCRIBED BY MIL-D-70327”. Accepted without a check.
  • Note 3: read “3. SOLDER PER MIL· 6-6872 USING SOLDER PER QQ-971 Sn 60”, where the drawing has the solder specifications MIL-S-6872 and QQ-S-571, on damaged film. Accepted without a check.
  • Note 4: read “4.DO 5.WIREWRAP NOT INSTA / ER - NO FIND 1002031 NO. 2 THRU AND PER FIND NOJO 1006151 UNTIL WIREWRAPPING IS COMPLETE”, where the drawing prints “4.DO NOT INSTALL FIND NO. 2 THRU FIND NO.10 UNTIL WIREWRAPPING IS COMPLETE”. Accepted without a check.
  • Note 5: read “5.WIREWRAP / ER NO 1002031 AND PER 1006151”, where the drawing prints “5.WIREWRAP PER ND 1002031 AND PER 1006151”. Accepted without a check.
  • Note 6: read “6.WIREWPAP PER NDIOOZO31 AND PER 1006156”, where the drawing prints “6.WIREWRAP PER ND1002031 AND PER 1006156”. Accepted without a check.
  • Envelope Length: worked out as “285”, which is wrong: the tray’s overall size is printed nowhere on this sheet; .285/.275 is a small height dimensioned at six places. Waiting for a person.
  • Envelope Width: worked out as “240”, which is wrong: .240/.180 is a small height in detail C, not the tray’s width. Waiting for a person.
  • Envelope Height: worked out as “.275”, which is wrong: .275 is the lower limit of .285/.275, a small feature dimensioned at six places, not the tray’s height. Waiting for a person.

1 of its values are handwritten on the drawing, and every one waits for a person.

Where this reading came from

The drawing is apollo-1003163-norev-n118 in the project's corpus (real/drawing-v1): MIT Instrumentation Laboratory for NASA; a U.S. National Archives aperture card, via the Internet Archive, drawn August 1963, from archive.org under Public Domain Mark 1.0. The values are the engine's saved result from evaluation run ABL2-real/20261012-182130 (run 1), engine version ev1-3684d4286e2783c2, read October 12, 2026, shown exactly as the app's review screen shows them: confidence as a band, never a number, and sizes and counts (Assist) always waiting for a person.

Drawing file (SHA-256)
a04286607b9916fd739f58d5b006363ca0523ae6fb5570ef42f7852405335a6b
Engine result (SHA-256)
c58e24dbaaca7610a34d20782e0957ae9c610d5c48208b85314699abb5df06da
Template
drawing v1

Early access

Be first to try SpecCapture.

Leave your email and we will let you know when early access opens. Plans start at $79/mo.