• 50 values read
  • 39 boxed on the drawing
  • 21 waiting for a person
  • Read October 12, 2026
The drawing: A 1963 Apollo drawing scanned from microfilm: a revision block, handwritten signatures, and a next-assembly range, 1007150 THRU 1007141, read as ten.
What to show on the drawing
Read and checkedWaiting for a person to checkHow sure the engine isA table, with the rows readA part read as a wholeOutlined where the engine found them: Title block, General notes, Revision History (2 rows), Application (next assembly / used on) (10 rows).The zone gridThe border's zones, D to A and 4 to 1, as the engine read them. Select a value to see its zone.

A 1963 Apollo drawing scanned from microfilm: a revision block, handwritten signatures, and a next-assembly range, 1007150 THRU 1007141, read as ten. Real engine output.

MIT Instrumentation Laboratory for NASA; a U.S. National Archives aperture card, via the Internet Archive. Drawn May 9, 1963. Source: archive.org. License: Public Domain Mark 1.0. Shown here in grayscale, with the reading drawn over it. Nobody named on it endorses SpecCapture.

Checked by hand against the drawing, this reading got 8 values wrong, 2 of them accepted without a check: what it got wrong.

Title block

Identification

Part NumberAccepted on its own, 88% confidence
Drawing NumberAccepted on its own, 88% confidence
RevisionAccepted on its own, 98% confidence
TitleAccepted on its own, 99% confidence
Sheet NumberAccepted on its own, 95% confidence
Sheet CountWaiting for a person to check, 95% confidence

Material and finish

Material SpecificationWaiting for a person to check, 69% confidence
Finish / CoatingAccepted on its own, 86% confidence
Surface Finish (roughness)Accepted on its own, 95% confidence

Tolerances

Default Decimal ToleranceAccepted on its own, 93% confidence

Approvals

RoleNameDate
Drawn
Checked
Approved

Sheet

Sheet SizeAccepted on its own, 99% confidence
ScaleAccepted on its own, 91% confidence
UnitsAccepted on its own, 98% confidence
Drawing StandardAccepted on its own, 94% confidence

Assist

Sizes and counts worked out from the drawing. Check these before you rely on them.

Envelope LengthWaiting for a person to check, 89% confidence
Envelope WidthWaiting for a person to check, 90% confidence
Envelope HeightWaiting for a person to check, 63% confidence
Envelope FormWaiting for a person to check, 86% confidence
Envelope UnitsWaiting for a person to check, 97% confidence
Tightest Tolerance on PrintWaiting for a person to check, 61% confidence
GD&T Callout CountWaiting for a person to check, 95% confidence
Thread Callout CountWaiting for a person to check, 95% confidence

Revision History

RevDescriptionDateApproved By

Application (next assembly / used on)

Next Assembly

General notes

What this reading got wrong

  • Description · Rev A: read “OBSOLETE PER TORR 04746”, where the drawing prints “OBSOLETE PER TDRR 04746”. Waiting for a person.
  • Description · Rev B: read “REACTIVATED PER TORR 05710”, where the drawing prints “REACTIVATED PER TDRR 05710”. Waiting for a person.
  • Approved By · Rev A: read “0”, where the drawing has a handwritten initial. Accepted without a check.
  • Drawn By: read “IF. Welch”, where the drawing prints “J.F. Welch”. Waiting for a person.
  • Approved By: read “IN B Turner”, where the drawing prints “W.B. Turner”. Waiting for a person.
  • Note 4: read “4. REMOVE ALL BURRS AND SHARP EDGES .005/015”, where the drawing prints “4. REMOVE ALL BURRS AND SHARP EDGES .005/.015”. Accepted without a check.
  • Envelope Width: worked out as “.203”, which is wrong: the washer is round, so its width is its outside diameter, .297; .203 is its hole. Waiting for a person.
  • Tightest Tolerance on Print: worked out as “.005”, which is wrong: the thickness, .022/.018, holds ±.002. Waiting for a person.

10 of its values are handwritten on the drawing, and every one waits for a person.

Where this reading came from

The drawing is apollo-1004206-revB-n96 in the project's corpus (real/drawing-v1): MIT Instrumentation Laboratory for NASA; a U.S. National Archives aperture card, via the Internet Archive, drawn May 9, 1963, from archive.org under Public Domain Mark 1.0. The values are the engine's saved result from evaluation run ABL2-real/20261012-182130 (run 1), engine version ev1-3684d4286e2783c2, read October 12, 2026, shown exactly as the app's review screen shows them: confidence as a band, never a number, and sizes and counts (Assist) always waiting for a person.

Drawing file (SHA-256)
f2f0047f2d4d4c926835690511d7bed9cedd06c7c0903349d75c4f0823404597
Engine result (SHA-256)
4026ad277cf68af96b90b1fab2610b792b343a901642c8138cb0e9df7e9590a2
Template
drawing v1

Early access

Be first to try SpecCapture.

Leave your email and we will let you know when early access opens. Plans start at $79/mo.