• 31 values read
  • 21 boxed on the drawing
  • 14 waiting for a person
  • Read October 12, 2026
The drawing: A 1963 Apollo sheet of six insulators: a dash-number table lists the variants, whose sizes the template does not ask for.
What to show on the drawing
Read and checkedWaiting for a person to checkHow sure the engine isA table, with the rows readA part read as a wholeOutlined where the engine found them: Title block, General notes, Application (next assembly / used on) (1 row), Dash Numbers (tabulated variants) (6 rows).The zone gridThe border's zones, D to A and 4 to 1, as the engine read them. Select a value to see its zone.

A 1963 Apollo sheet of six insulators: a dash-number table lists the variants, whose sizes the template does not ask for. Real engine output.

MIT Instrumentation Laboratory for NASA; a U.S. National Archives aperture card, via the Internet Archive. Drawn 1963. Source: archive.org. License: Public Domain Mark 1.0. Shown here in grayscale, with the reading drawn over it. Nobody named on it endorses SpecCapture.

Checked by hand against the drawing, this reading got 5 values wrong, 1 of them accepted without a check: what it got wrong.

Title block

Identification

Part NumberAccepted on its own, 94% confidence
Drawing NumberAccepted on its own, 94% confidence
TitleAccepted on its own, 96% confidence
Sheet NumberWaiting for a person to check, 41% confidence
Sheet CountWaiting for a person to check, 41% confidence

Material and finish

Material SpecificationWaiting for a person to check, 53% confidence
Material FormAccepted on its own, 87% confidence

Tolerances

Default Decimal ToleranceAccepted on its own, 90% confidence

Approvals

RoleNameDate
DrawnNothing read
Checked
Approved

Sheet

Sheet SizeAccepted on its own, 93% confidence
UnitsAccepted on its own, 91% confidence
Drawing StandardAccepted on its own, 95% confidence

Assist

Sizes and counts worked out from the drawing. Check these before you rely on them.

Envelope LengthWaiting for a person to check, 45% confidence
Envelope WidthWaiting for a person to check, 56% confidence
Envelope HeightWaiting for a person to check, 67% confidence
Envelope FormWaiting for a person to check, 70% confidence
Envelope UnitsWaiting for a person to check, 97% confidence
Tightest Tolerance on PrintWaiting for a person to check, 61% confidence

Application (next assembly / used on)

Next Assembly

Dash Numbers (tabulated variants)

Dash Number

General notes

What this reading got wrong

  • Material Specification: read “PLASTIC PER L-P-00519 TYPE 2,CLASS 1”, where the drawing prints “.003/.005 PLASTIC SHEET PER L-P-00519 TYPE 2,CLASS 1”. Waiting for a person.
  • Approved By: read “WSummer”, where the drawing prints “W.B. Turner”. Waiting for a person.
  • Note 1: read “I. INTERPRE1 DRAWING IN ACCORDANCE WITH STANDARDS PRESCRIBED BY MIL D 70327”, where the drawing prints “1. INTERPRET DRAWING IN ACCORDANCE WITH STANDARDS PRESCRIBED BY MIL D 70327”. Accepted without a check.
  • Envelope Length: worked out as “9”, which is wrong: there is no one length: each dash number in the table has its own, from 6.550 to 9.00. Waiting for a person.
  • Envelope Width: worked out as “400”, which is wrong: each dash number has its own width, from .400 to 1.656, and this one lost its decimal point. Waiting for a person.

5 of its values are handwritten on the drawing, and every one waits for a person.

Where this reading came from

The drawing is apollo-1004081-norev-n77 in the project's corpus (real/drawing-v1): MIT Instrumentation Laboratory for NASA; a U.S. National Archives aperture card, via the Internet Archive, drawn 1963, from archive.org under Public Domain Mark 1.0. The values are the engine's saved result from evaluation run ABL2-real/20261012-182130 (run 1), engine version ev1-3684d4286e2783c2, read October 12, 2026, shown exactly as the app's review screen shows them: confidence as a band, never a number, and sizes and counts (Assist) always waiting for a person.

Drawing file (SHA-256)
e106e9cf761ee43ef2856d421c86d6842a9b6e6faf7d730a677b8c8fcc0ff89e
Engine result (SHA-256)
f8695049be74f0f07c4743737f9ad8bd6a340be90eb638850c8ac87fc107b073
Template
drawing v1

Early access

Be first to try SpecCapture.

Leave your email and we will let you know when early access opens. Plans start at $79/mo.